Table of Contents
Advertisement
The OSD menus
4. The installation menu
a. The following picture is the sketch map of the installation
menu.
b. The definition of each option:
1.Program NR: switch the program by the sequence of program
number increase or Decrease by using the key
.
2.Color system: select the color system from Pal-443, SECAM,
UNKNOWN, AUTO and NTSC-443 by using the key
.
3.Sound System: select the sound system from AUTO, BG, I,
DK L and BG NICAM by using the key
.
4.Auto Store: auto search programs start with the key
, and
quit with the key menu or
. SECAM/L signal will be searhed
only when Sound System is set to
L .
5.Frequency: Show the frequency of the current program.
Frequency can be edited by directly press digit keys. This is the
convenient way to tune to a program ,if you know the exact
frequency, instead of auto searching.
6.AFC: select the function of Auto frequency control with the
key
.
20
Advertisement
Table of Contents
