Table of Contents
Advertisement
The OSD menus
A.In the state of that the input source is TV, VIDEO,
S-VIDEO YPbPr YCbCr
1.The picture menu
a.The following picture is the sketch map of the picture menu.
b. The definition of each option:
1.Brightness: Change the value of brightness with the key
in the rang of 0 to 100.
2.Contrast: Change the value of contrast with the key
in the rang
of 0 to 100.
3.Color: Change the value of color with the key
in the rang of 0 to
100.
4.Sharpness: Change the value of sharpness with the key
in the
rang of 0 to 100.
5.Tint: Change the value of Tint with the key
in the rang of -50 to
50,usually 0 is recommended.
6.Set the function of Dynskin Tone on or off by using the key
.
7.Set the color temp to cool, warm or normal by using the key
.
8.Set the 3D Noise Reduction to low, mid or high by using the key
.
9.Set the picture preset to user, vivid, movie or standard by using the
key
.
*TINT will only show when the color system is NTSC
14
Advertisement
Table of Contents
