Table of Contents
Advertisement
The OSD menus
2. The sound menu
a. The following picture is the sketch map of the sound menu.
b. The definition of each option:
1.Volume: Change the value of volume with the key
in the
rang of 0 to 100.
2.Balance: Change the value of balance with the key
from
-50 to 50,usually 0 is recommended.
3.Bass: Change the value of bass with the key
in the rang of
0 to 100.
4.Treble: Change the value of treble with the key
in the rang
of 0 to 100.
5.Set the function of AVL on or off by using the key
.
Setting AVL to on will limit the abruptly sound increasing
usually caused by advertising time.
6.Set the function of Loudness on or off by using the key
.
Setting Loudness on can make bass a little bit enhanced when
the volume is small.
7.Set the sound preset to Music, Theatre, Personal or Voice.
8.Effect: Change the EFFECT in the sequence as
INCR STEREO NORMAL INCR STEREO
15
Advertisement
Table of Contents
