Specifying The Zone Used With The Remote Control Unit; Resetting The Remote Control Unit; Information - Denon AVR-891 Owner's Manual

Specifying the zone used with the
remote control unit
ZONE SELECT
When the button is pressed, only the set zone can be
operated with the remote control unit.
1
Press and hold POWER ON and
ZONE/DEVICE ON
for at least 3
seconds.
The zone mode indicator flashes twice.
2
ZONE SELECT
Press .
The zone mode indicator flashes twice.
3
1 3
Press – to set.
The zone mode indicator flashes twice.
[Settable items]
1 When only using "MAIN ZONE"
2 When using "MAIN ZONE" /
"ZONE2"
3 When using "MAIN ZONE" /
"ZONE2" / "ZONE3" (Default)

Resetting the remote control unit

Settings for the remote control unit are returned to the default setting.
1
Press and hold POWER ON and
ZONE/DEVICE ON
for at least 3
seconds.
The zone mode indicator flashes twice.
2
Press 9 , 8 and 1 , in that order.
"MAIN" indicator flashes four times.
All the settings are restored to their
defaults.

Information

Information
Here, we list various information related to this unit.
Please refer to this information as needed.
F Part names and functions vpage 68
F Other information vpage 72
F Troubleshooting vpage 80
F Specifications vpage 82
F Index vpage 83
ENGLISH
67