Information - Denon AVR-891 Owner's Manual

ENGLISH

Information

Show information about receiver settings, input signals, etc.
Items
n MAIN ZONE
Status
Show information about
This item shows information about settings for MAIN ZONE.
current settings.
The information displayed differs according to the input source.
Select Source / Name / Surround Mode / Input Mode /
Decode Mode / HDMI / Digital / Component / Rec Select /
Video Select / Video Mode / Content Type / Video Convert /
i/p Scaler / Resolution / Progressive Mode / Aspect etc.
n ZONE2
This item shows information about settings for ZONE2.
Power / Select Source / Volume Level
"Status" for ZONE2 is displayed when "Amp Assign" (vpage 55) is
set to "ZONE2".
Audio Input Signal Surround Mode : The currently set surround mode.
Show information about Signal : The input signal type.
audio input signals. fs : The input signal's sampling frequency.
Format : The number of channels in the input signal (front, surround, LFE).
Offset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround back
channel. "MATRIX" is displayed with Dolby Digital EX and DTS-ES Matrix
signals, "DISCRETE" with DTS-ES Discrete signals.
This function is automatically activated when
playing Dolby Digital sources.
It automatically corrects the standard signal
level for individual program sources.
The correction value can be checked using
STATUS
the
HDMI Information HDMI Signal Information
Show information about • Resolution / Color Space / Pixel Depth
HDMI input/output signals
HDMI Monitor Information
and monitor.
• Interface / Supported resol.
Auto Surround Mode Analog/PCM 2ch / Digital 2ch / Digital 5.1ch / Multi ch
Show information about
auto surround mode
settings.
62
Remote control operation
buttons
Setting details
Dialogue normalization function
.
The figure is the corrected
value. This cannot be
changed.
Move the cursor
(Up/Down/Left/Right)
Items
Quick Select Quick Select 1 / Quick Select 2 / Quick Select 3 / ZONE2 Quick Select 1 /
Show information about ZONE2 Quick Select 2 / ZONE2 Quick Select 3
• Name / Select Source / Video Select / Volume Level / MultEQ ® /
"Quick select function"
Dynamic EQ ® / Dynamic Volume™ / Analog/PCM 2ch / Digital 2ch /
(vpage 38) settings.
Digital 5.1ch / Multi Ch
"ZONE2 Quick Select" is displayed when "Amp Assign" (vpage 55)
is set to "ZONE2".
Preset Channel A / B / C / D / E / F / G
Show information about A1 – A8 / B1 – B8 / C1 – C8 / D1 – D8 / E1 – E8 / F1 – F8 / G1 – G8
preset channels.
TUNER
Confirm the setting
Setting details
Return to previous menu