Manual Setup; Speaker Setup - Denon AVR-891 Owner's Manual

Manual Setup

Set when changing Audyssey ® Auto Setup settings, or when changing the audio, video, display
or other settings.
• If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible
to set MultEQ ® , Dynamic EQ ® and Dynamic Volume™ (vpage 52, 53).
• Can be used without changing the settings. Please set if necessary.
Menu operation
1
Press ZONE SELECT to switch the zone mode to "MAIN".
The "MAIN" indicator lights.
2
Press AMP to set the remote control unit to amplifier operation
mode.
3
MENU
Press .
The menu is displayed on the TV screen.
4
Press ui to select the menu to be set or operated.
5
Press ENTER or p to enter the setting.
RETURN
• To return to the previous item, press
MENU
• Exiting the Menu, press while the menu is displayed.
The menu display disappears.
Items that can be set with the Manual Setup procedure
Speaker Setup (vpage 55) HDMI Setup (vpage 58)
MANUAL SETUP MANUAL SETUP

SPEAKER SETUP

HDMI SETUP
Amp Assign RGB Range
Speaker Config. Auto Lip Sync
Bass Setting HDMI Audio Out
Distance HDMI Control
Channel Level
Crossover Frequency
Front Speaker Setup
Assign surround back AMP for other use Use video range from 16 (black) to 235 (white)
ZONE2 Setup (vpage 60)
MANUAL SETUP
ZONE2 SETUP
Level Lch 0dB
Level Rch 0dB
Volume Limit OFF
Power On Level Last
Mute Level Full
RETURN
Adjust the left channel output level
Remote control operation
buttons
.
Audio Setup (vpage 59)
MANUAL SETUP
AUDIO SETUP
Normal 2ch Direct/Stereo
ON Auto Surround Mode
AMP EQ Customize
OFF
RETURN Return
Make various settings for 2ch mode playback
Option Setup (vpage 60)
MANUAL SETUP
OPTION SETUP
Volume Control
Source Delete
GUI
Remote Preset Codes
Quick Select Name
Zone Rename
Remote ID Setup
Dimmer
Return
Make settings for volume control
Move the cursor
(Up/Down/Left/Right)
Speaker Setup
Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup.
• If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select
MultEQ, Dynamic EQ and Dynamic Volume (vpage 52, 53).
• Manual Setup can be used without changing the settings. Please set if necessary.
Setting items
Normal : Set when using 7.1-channel (Front/Center/Surround/Surround
Amp Assign
Set the speakers connected Back/Subwoofer) speakers.
to this unit. ZONE2 : Set for connecting the speakers for ZONE2 to the SURR. BACK/
AMP ASSIGN terminals.
Front Height : Set for connecting the front height speakers to the SURR.
BACK/AMP ASSIGN terminals.
Bi-Amp : Set for connecting a tweeter of a front speaker to the SURR.
BACK/AMP ASSIGN terminals and a woofer of the front speaker to the
FRONT terminals.
Front B : Set for connecting the second front speakers to the SURR.
BACK/AMP ASSIGN terminals. In this case, make settings for "Front
Speaker Setup" (vpage 57).
2CH : Set for 2-channel direct/stereo playback. When "2CH" is set,
connect the second set of front speakers to the SURR.BACK/AMP
ASSIGN terminals.
Front : Set the front speaker size.
Speaker Config.
Select speaker configuration • Large : Use a large speaker that can adequately play back low
and size (bass reproduction frequencies.
capability). • Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
NOTE
Do not use the outward
• When "Subwoofer" is set to "No", "Front" is automatically set to
shape of the speaker to
"Large".
determine selection of a
• When "Front" is set to "Small", "Center", "Surround", "S.Back" and
"Large" or "Small" speaker.
"F.Height" can not be set to "Large".
Instead, use the frequencies
Center : Set the presence and size of the center speaker.
set in "Crossover
• Large : Use a large speaker that can adequately play back low
Frequency" (vpage 57) as
frequencies.
the standard for determining
• Small : Use a small speaker that has inadequate playback capacity for
bass reproduction capability.
low frequencies.
• None : Select when a center speaker is not connected.
"Large" is not displayed when "Front" is set to "Small".
Subwoofer : Set the presence of a subwoofer.
• Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
When "Front" is set to "Small", "Subwoofer" is automatically set to
"Yes".
Confirm the setting
ENGLISH
Default settings are underlined.
Setting details
55
Return to previous menu