Denon AVR-891 Owner's Manual page 68

8
The procedures for registering remote control codes
and remote control preset registration are displayed.
MANUAL SETUP OPTION SETUP
REMOTE PRESET CODES
Category : DVD
Brand : Denon
Code [ 1/ 3] : 30490
Setup Remote
1. Press [INPUT SOURCE] button.
2. Press and hold 3sec. both [POWER ON]
[DEVICE ON] button.
3. Input Code with [0-9] button.
4. Press any key to check device.
(e.g. [DEVICE ON])
QUICK1 OK QUICK2 NG QUICK3
Press QUICK 1 if device works, QUICK 2 if not
NOTE
If a wrong brand name is selected, press
following screen is displayed:
MANUAL SETUP OPTION SETUP
REMOTE PRESET CODES
Press [AMP] button. And press
[ENTER] button to return BRAND
SELECT MENU.
O K
AMP ENTER
Press then to return to step 7.
9
Press the input source button on which the preset
code is to be registered ( DVD , BD
DOCK V.AUX GAME CD TV
, , , or ).
TV
• For , only the preset code for the categories "TV", "TV/DVD", or
"TV/VCR" can be registered.
• For "TV", "TV/DVD", or "TV/VCR" categories, only the preset
TV
code for can be registered.
10
POWER ON ZONE/DEVICE ON
Hold and
simultaneously for more than 3 seconds.
The zone mode indicator flashes twice.
11
Enter a five-digit code using
Press the buttons with an interval less than 10 seconds.
Category
Brand
Code [ 1/ 3]
Setup Remote
1. Press [INPUT SOURCE] button.
2. Press and hold 3sec. both [POWER ON]
3. Input Code with [0-9] button.
4. Press any key to check device.
Return
QUICK1
Press QUICK 1 if device works, QUICK 2 if not
• When the code is registered:
The zone mode indicator flashes twice.
QUICK SELECT 3
. The
• When the code is not registered correctly:
The mode indicator slowly flashes once. Perform from step 9
again.
• When an input number is not correct:
POWER ON
Press
9 again.
12
Operate the device being used to check the operation.
• If the device is operating, press
Go to step 13.
• If the device is not operating, press
Go to step 14.
13
The screen shown below is displayed, and registration
, SAT/CBL , DVR , of the preset code is completed.
pressed
• The menu screen is retrieved. Press
0 – 9 .
MANUAL SETUP OPTION SETUP
REMOTE PRESET CODES
: DVD
: Denon
: 30490
[DEVICE ON] button.
(e.g. [DEVICE ON])
OK QUICK2 NG QUICK3 Return
once then perform the operations from step
QUICK SELECT 1
.
QUICK SELECT 2
.
MANUAL SETUP OPTION SETUP
REMOTE PRESET CODES
Remote Preset Codes setup is
finished.
Press [AMP] button. And press
[ENTER] button to return MENU.
O K
AMP ENTER
then .
Registering preset codes
14
Either of the screens below is displayed.
q
MANUAL SETUP OPTION SETUP
REMOTE PRESET CODES
Selected code is not matched.
Plesse try other codes.
• The screen is displayed for 3 seconds, then the next preset
registration screen is displayed automatically.
w
MANUAL SETUP OPTION SETUP
REMOTE PRESET CODES
Sorry, your remote is not
supported. This function can not
be used for your device
Press [AMP] button. And press
[ENTER] button to return MENU.
O K
GIf screen q is displayedH
The device may be operating with the preset code displayed next.
The preset registration screen is displayed. Repeat steps 9 to 12.
GIf screen w is displayedH
The device cannot be controlled with the remote control unit supplied
with this unit. Use the remote control unit supplied with the device
to be used. The menu screen is retrieved. Press
Some manufacturers use more than one type of remote control code.
Preset codes to change the number and verify correct operation.
NOTE
Depending on the model and year of manufacture of your equipment,
some buttons may not operate.
ENGLISH
AMP ENTER
then .
65