Resetting The Microprocessor - Denon AVR-3312CI Owner's Manual
Integrated network av receiver
Hide thumbs
Also See for AVR-3312CI:
- User manual (16 pages) ,
- Antes de empezar (16 pages) ,
- Getting started (16 pages)
Table of Contents
Advertisement
Resetting the microprocessor
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
ON/STANDBY
1
Turn off the power using
ON/STANDBY
2
Press
ON/STANDBY
while simultaneously pressing
PRESET CHANNEL 3
.
3
Once the display starts flashing at intervals of about 1 second, release the two
buttons.
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
PRESET CHANNEL 2
PRESET CHANNEL 3
.
PRESET CHANNEL 2
and
149
- Quick Links:
- Connections
Hide quick links:
Advertisement
Table of Contents
