Display - Denon AVR-3312CI Owner's Manual

Display

q
Input signal indicators
w
Input signal channel indicators
These light when digital signals are input.
When playing HD Audio sources, the
signal from an extension channel (a channel other than the front,
center, surround, surround back or LFE channel) is input.
If there are two or more extension channels, the
indicators light.
e
Information display
The input source name, surround mode, setting values and other
information are displayed here.
r
Output signal channel indicators
Lights when audio signals are being output from the speakers.
t
Front speaker indicator
This lights according to the setting of the front A and B speakers.
y
Monitor output indicator
These light according to the HDMI monitor output setting.
When set to "Auto (Dual)", the indicators light according to
connection status.
u
Master volume indicator
i
MUTE indicator
This lights when the mute mode is selected (vpage 29).
W0 Q9 Q8
q w
o
PARTY indicators
These light during party mode
function").
• ORGANIZER
indicator lights when a
This lights to indicate that party mode has started as Organizer.
• ATTENDEE
This lights to indicate that party mode has started as Attendee.
and
Audyssey ® indicators
Q0
Lights up as follows, depending on the setting of "MultEQ ® XT",
101), "Dynamic EQ ® "
(vpage
Volume ® " (vpage 101).
When "MultEQ ® XT", "Dynamic EQ ® " and
"Dynamic Volume ® " are "ON".
When "MultEQ ® XT" and "Dynamic EQ ® " are
"ON" and "Dynamic Volume ® " is "OFF".
When "MultEQ ® XT" is "ON" and "Dynamic EQ ® "
and "Dynamic Volume ® " are "OFF".
Q1
Sleep timer indicator
This lights when the sleep mode is selected (vpage 72, 84).
Q2
RESTORER indicator
This lights when the RESTORER mode is selected (vpage 103).
Q7 Q2
Q6 Q5 Q4 Q3 Q1 Q0 o
e
(vpage 77 "Party mode
(vpage 101) and "Dynamic
129
y
i u
r t
Q3
Multi-zone indicators
This lights up when ZONE2, ZONE3 (separate room) power is
turned on (vpage 83).
Q4
AL24 indicator
This lights when AL24 Processing Plus (vpage 142) is activated.
Q5
Input mode indicators
Set the audio input modes for the different input sources
(vpage 94).
Q6
HDMI indicator
This lights when playing using HDMI connections.
Q7
Tuner reception mode indicators
These light according to the reception conditions when the input
source is set to "HD Radio".
STEREO : In the FM mode, this lights up when receiving stereo
broadcasts.
TUNED : Lights up when the broadcast is properly tuned in.
AUTO : Lights up when in the auto tuning mode.
Q8
Recording output source indicator
This lights when the REC OUT mode is selected.
Q9
Decoder indicators
These light when the respective decoders are operating.
W0
HD indicator
This light during HD Radio reception.