Resetting The Microprocessor; Specifications - Denon AVR-2311CI Owner's Manual

ENGLISH

Resetting the microprocessor

Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
ON/STANDBY
1
7XUQ RII WKH SRZHU XVLQJ
ON/STANDBY
2
3UHVV ZKLOH VLPXOWDQHRXVO\ SUHVVLQJ
ON/STANDBY
SURROUND MODE 1 
3
2QFH WKH GLVSOD\ VWDUWV ÀDVKLQJ DW LQWHUYDOV RI DERXW  VHFRQG UHOHDVH WKH WZR
EXWWRQV
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
84
SURROUND MODE 1
SURROUND MODE 0

SURROUND MODE 0
Specifications
n Audio section
• Power amplifier
Rated output:
Output connectors:
• Analog
Input sensitivity/Input impedance:
Frequency response:
S/N:
n Video section
DQG
• Standard video connectors
Input/output level and impedance:
Frequency response:
• Color component video connector
Input/output level and impedance:
Frequency response:
n HD Radio section
Receiving Range:
Usable Sensitivity:
S/N (IHF-A):
Total harmonic Distortion (at 1 kHz):
n General
Power supply:
Power consumption:
Maximum external dimensions:
Weight:
n Remote Control Unit (RC-1146)
Batteries:
Maximum external dimensions:
Weight:
For purposes of improvement, specifications and design are subject to change without notice.
Front:
105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Center:
105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Surround:
105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Surround back:
105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
6 – 16 Ω
200 mV/47 kΩ
10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
100 dB (IHF–A weighted, DIRECT mode)
1 Vp-p, 75 Ω
5 Hz – 10 MHz — +1, –3 dB
Y (brightness) signal — 1 Vp-p, 75 Ω
P / C signal — 0.7 Vp-p, 75 Ω
B B
P / C signal — 0.7 Vp-p, 75 Ω
R R
5 Hz – 60 MHz — +0, –3 dB (when "Video Convert" set to "OFF")
[FM]
–15
(Note: μV at 75 Ω, 0 dBf = 1 x 10 W)
87.5 MHz – 107.9 MHz 530 kHz – 1710 kHz
1.5 μV (14.8 dBf) 20 μV
MONO 78 dB
STEREO 68 dB
HD 85 dB 85 dB
MONO 0.1 %
STEREO 0.2 %
HD 0.02 % 0.02 %
AC 120 V, 60 Hz
600 W
0.1 W (Standby)
1.9 W (CEC standby)
434 (W) x 171 (H) x 381 (D) mm (17-3/32" x 6-47/64" x 15")
10.8 kg (23 lbs 13 oz)
R6/AA Type (two batteries)
53 (W) x 224 (H) x 28 (D) mm (2-3/32" x 8-13/16" x 1-7/64")
160 g (5.6 oz, including batteries)
[AM]