Akw Screedmaster 25100 Installation And User Care Instructions

ALWAYS
read these installation instructions carefully before
installing this product and leave with the end user.
ALWAYS
match the correct waste to the shower base.
ALWAYS
have the pumped waste installed by a trained and
experienced skilled craftsman.
NEVER
use the pumped waste without the unit fully
assembled.
DO NOT place matches or cigarettes on or near this product.
The following plastic materials are used in this
product:
Acrylonitrile Butadiene Styrene (ABS),
BEWARE A child finger trap may be present during the
handling or use of this product.
ALWAYS Keep fingers clear of the gaps between the cover,
and the locking ring.
*John Guest and Speedfit are registered trade marks of John Guest International Limited
*Polypipe is a registered trademark of Polypipe plc, a subsidiary of IMI plc.
Failure to install this AKW MediCare product in accordance with supplied instructions or the making of
unauthorised modifications will invalidate any warranty and will affect product safety.
The measurements throughout these installation and user care instructions have been converted from metric to its equivalent in
imperial, therefore all dimensions are approximate and subject to manufacturing tolerances. This information is furnished upon the
condition that the person receiving it shall make his/her own tests to determine the suitability thereof for his/her particular purpose.
AKW Medi-Care Limited, Liberty House, Pointon Way, Hampton Lovett, Droitwich Spa, WR9 0LR
Tel.+44 (0) 1905 823298 - Fax. +44 (0) 1905 823297 - www.akw-medicare.co.uk
© 2011 AKW Medi-Care Limited
STOP
15mm or 22mm Screedmaster
Installation And User Care Instructions
John Guest Speedfit* Adaptor
Installer: Please ensure that this information is left with the end user of this product.
For full waste specifications see the current AKW MediCare catalogue.
04-018-004-06
Colour: White Internal Building use only
Registered Design/ Patent GB 2374876