Advertisement
Quick Links
ALWAYS
read these installation instructions carefully before
installing this product and leave with the end user.
ALWAYS
match the correct waste to the shower base.
ALWAYS
have the waste installed by a trained and
experienced skilled craftsman.
NEVER
use the waste without the unit fully assembled.
DO NOT
place matches or cigarettes on or near this product.
The following plastic materials are used in this
product:
Acrylonitrile Butadiene Styrene (ABS),
BEWARE
A child finger trap may be present during the
handling or use of this product.
ALWAYS
Keep fingers clear of the gaps between the cover,
and the locking ring.
Failure to install this AKW MediCare product in accordance with supplied instructions or the making of
unauthorised modifications will invalidate any warranty and will affect product safety.
The measurements throughout these installation and user care instructions have been converted from metric to its equivalent in
imperial, therefore all dimensions are approximate and subject to manufacturing tolerances. This information is furnished upon the
condition that the person receiving it shall make his/her own tests to determine the suitability thereof for his/her particular purpose.
AKW Medi-Care Limited, Liberty House, Pointon Way, Hampton Lovett, Droitwich Spa, WR9 0LR
Tel.+44 (0) 1905 823298 - Fax. +44 (0) 1905 823297 - www.akw-medicare.co.uk
© 2011 AKW Medi-Care Limited
STOP
Tuff Form Waste Adaptor
Installation And User Care Instructions
Installer: Please ensure that this information is left
For full waste specifications see the current AKW MediCare catalogue.
03-048-004-06
Wet Floor Former, Waste Hole Reducer
Colour: White
Internal Building use only
Registered Design 000135702-0009
with the end user of this product.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Akw 25107
Summary of Contents for Akw 25107
- Page 1 Wet Floor Former, Waste Hole Reducer Colour: White Internal Building use only Failure to install this AKW MediCare product in accordance with supplied instructions or the making of unauthorised modifications will invalidate any warranty and will affect product safety. Registered Design 000135702-0009 The measurements throughout these installation and user care instructions have been converted from metric to its equivalent in imperial, therefore all dimensions are approximate and subject to manufacturing tolerances.
- Page 2 Do not use strong or concentrated acidic or alkaline cleaning materials as these may discolour or otherwise damage the product. AKW do not approve or recommend autoclave cleaning of any of the components due to the damage this can cause to the special engineering plastics used in the construction of this product.
Need help?
Do you have a question about the 25107 and is the answer not in the manual?
Questions and answers