Page 1
Onyx Linea Shower Tray INSTALLATION INSTRUCTIONS Read all instructions before installation and leave this document with the end user for future reference as it contains important warranty information...
Make sure that you follow the manufacturer’s instructions to degrease any surfaces that you need to apply silicone to. Use the external packaging to protect the floor and wall when you assemble the product. Use a spirit level throughout the installation. Order: 01905 823 299 orders.akw-ltd.co.uk Technical Support: 01905 560 219...
Onyx trays can be trimmed down to within 150mm of the waste cover area. The sides on the tray X and Y shown are shaded out to show the trimmable areas. General: 01905 823 298 www.akw-ltd.co.uk...
Protect the waste trap and cover secure the tray into position and the whole of the showering area, from debris during installation. see manufacturers instructions. check all 4 sides are level again. Order: 01905 823 299 orders.akw-ltd.co.uk Technical Support: 01905 560 219...
Apply a waterproof membrane to Protect the waste trap and cover the whole of the showering area, check all 4 sides are level again. from debris during installation. see manufacturers instructions. General: 01905 823 298 www.akw-ltd.co.uk...
In the event that you should encounter a problem with this product, please contact your local installer and if this does not resolve the issue, then contact AKW technical enquiries who will provide further advice and, if necessary, arrange for a maintenance engineer to visit and report any issues.
Need help?
Do you have a question about the Onyx Linea AKW23980WH and is the answer not in the manual?
Questions and answers