Preset Skip; Parental Lock; Antenna Aiming; Assign - Denon AVR-3808CI Owner's Manual

s Preset Skip
Set the preset memories that you do not want to display when
tuning.
A ~ G
Select the preset channel(s) you do not want to display.
[Input source] SIRIUS
2 4
[Selectable items] All 1 3
[Selectable items] ON Skip
When set "All" to "Skip" , it is possible to skip entire preset memory
blocks (A to G).
d Parental Lock
For any channel, set the radio reception limits.
[Input source] SIRIUS
Lock Setting
Set the channel radio reception limits.
ENTER
.
q Press
w Using uio p , input the password (4 digits number) and press
ENTER
.
ui , and set the lock by pressing
e Select channel by pressing
p
.
[Selectable items]
Unlock
: Do not lock selected channel(s).
Lock
: L ock selected channel(s).
b W hen a Parental Locked channel is tuned, "Code : [ ]" is
displayed, then input the password.
• The default password is "0000".
• If the password is wrong, "Incorrect Code" is displayed. Input the
correct password.
• While listening to the channel being played, you can also set parental
lock (vpage 12).
Edit Lock Code
Change the password.
ENTER
.
q Press
w Select "Current Lock Code" and press
e Enter the current Lock Code using
ENTER
to confirm.
r Press
t Select "New Lock Code" and enter a new Lock Code using steps
q to e above.
y Select "Repeat Code" and re-enter the new Lock Code using steps
q to e above.
6 8
5 7
u Select "Execute" and press
• I f the old password is incorrectly input, "Current Lock Code Incorrect"
is displayed, and proceed again from step q.
• If the password input is 3 digits or less, "Enter 4 digits number" is
displayed, and input again with a 4 digit password.
• If the new password is not correctly input, "New Lock Code
Disagreement" is displayed and the password does not change.
f Antenna Aiming
Check the SIRIUS radio reception sensitivity.
[Input source]
Satellite
Indicate satellite signal strength.
Terrestrial
o
Indicate terrestrial signal strength.
n SIRIUS Antenna Aiming
Display
ENTER
.
uio p .
ENTER
.
SIRIUS
Condition
Signal strength is excellent
Signal strength is good
Signal strength is weak
No signal
g Assign
Assign input sources to input connectors.
HDMI
Select HDMI connector to assign to this source.
DVD HDP TV/CBL
[Input source]
DVR V.AUX
[Selectable items] 1 2 3 4 None
Input
DVD HDP TV/CBL SAT
source
Default
HDMI1 HDMI2 HDMI3 None
setting
When "HDMI Control" is set to "ON", the HDMI connector
assignment changes as follows.
Input
DVD HDP TV/CBL SAT
source
Default
HDMI1 HDMI2 HDMI3
None
setting
• With HDMI, the video and audio signals are transferred simultaneously.
To play the video signal assigned at "HDMI" combined with the
audio signal assigned at "Digital", select "Digital" at GUI menu
"Source Select" – "Input Mode".
• When the AVR-4308CI / AVR-3808CI and monitor are connected with
an HDMI cable, if the monitor is not compatible with HDMI audio
signal playback, only the video signals are output to the monitor.
• The audio signals input from the analog, digital and EXT. IN connectors
are not output to the monitor.
NOTE
• This cannot be set for input sources for which "iPod dock" or
"SIRIUS" is assigned.
• When "HDMI Control" (vpage 4) is set to "ON", HDMI cannot be
assigned to "TV/CBL".
Digital
Select digital input connector to assign to this source.
[Input source] CD DVD HDP
VCR DVR V.AUX
Coaxial1 ~ 3 Optical1 ~ 4
[Selectable items]
z
DENON LINK
ENGLISH
SAT VCR
VCR DVR V.AUX
None HDMI4 None
VCR DVR V.AUX
HDMI4
None None
TV/CBL SAT
( )
SIRIUS
None