Removing And Installing Server Module Components; Memory - Dell 1955 Hardware Owner's Manual

Figure 3-15. Closing a Server Module
1 cover
4 cover-release buttons (2)

Removing and Installing Server Module Components

The following procedures describe how to remove and install the following components:
• Memory modules
• Daughter cards
• Integrated NIC TOE feature
• Processors
• Server module battery
• Hard drives

Memory

You can add system memory to a maximum capacity of 32 GB (dual-ranked memory modules) or 16 GB
(single-ranked memory modules) by installing 533-MHz or 677-Mhz (when available) fully buffered
DIMM(FBD) DDR II memory modules. 256-MB, 512-MB, 1-GB, 2-GB, and 4-GB memory modules are
supported. You can purchase memory upgrade kits from Dell.
NOTICE:
Use only 533-MHz or 677-MHz (when available) DDR II FB memory modules.
1
4
2 server module
2
3
3 alignment pins (6)
Installing System Options
77