Fibre Channel Pass-Through Module - Dell 1955 Hardware Owner's Manual

Fibre Channel Pass-Through Module

The Fibre Channel pass-through module provides a bypass connection between the Fibre Channel
daughter card in the server module and optical transceivers for direct connection into a Fibre Channel
switch or a storage array. (see Figure 1-12). The Fibre Channel pass-through modules are hot-pluggable.
The Fibre Channel pass-through module in I/O bay 3 connects to port 1 on the optional Fibre Channel
daughter card installed in a server module. The Fibre Channel pass-through module in I/O bay 4
connects to port 2 on the optional Fibre Channel daughter card installed in a server module. To provide
redundancy, both I/O bay 3 and I/O bay 4 must have Fibre Channel pass-through modules installed.
Table 1-11 lists the functionality of the Fibre Channel pass-through module indicators. For additional
information on installing this module, see "Chassis I/O Module" on page 70.
NOTE:
The Fibre Channel pass-through module includes Short Wave Small Form Factor Pluggable (SFP) optical
transceivers. To ensure proper functionality, use only the SFPs provided with this module.
Figure 1-12. Fibre Channel Pass-through Module Indicators and Features
1
2
3
9 7 5 3 1
10 8 6 4 2
1 SFP Fibre Channel connector 2 green indicator 3 amber indicator
31
About Your System