Back-Panel Module Cage Assembly (Service-Only Procedure); Removing The Back-Panel Module Cage Assembly - Dell 1955 Hardware Owner's Manual

Figure 3-22. Installing a Hard Drive Into a Drive Carrier
1 screws (4)

Back-Panel Module Cage Assembly (Service-Only Procedure)

Removing the Back-Panel Module Cage Assembly

CAUTION:
Only trained service technicians are authorized to remove the system cover and access any of the
components inside the system. See your Product Information Guide for complete information about safety
precautions, working inside the computer, and protecting against electrostatic discharge.
1 Press the system power switch to turn off the system. See "System Status Features" on page 10.
2 Remove all of the server modules. See "Removing a Server Module" on page 73.
3 Remove the power supply modules. See "Removing a Power Supply Module" on page 58.
4 Remove the fan modules. See "Removing a Fan" on page 60.
5 Remove the DRAC/MC module. See "Removing a DRAC/MC Module" on page 61.
92
Installing System Options
1
2 drive carrier
2
3
3 hard drive