Dell XPS 700 Owner's Manual page 87

5 Remove the filler bracket or existing card (see "Removing PCI and PCI Express Cards" on page 86) to
create a card-slot opening.
6 Prepare the card for installation.
See the documentation that came with the card for information on configuring the card, making
internal connections, or otherwise customizing it for your computer.
7 Position the card so that it is aligned with the slot and the securing tab (if present) is aligned with the
securing slot.
NOTE:
If the card is full-length, insert the card guide into the alignment slot on the fan bracket.
1 PCI Express x16 card
NOTICE:
Ensure that you release the securing tab to seat the card. If the card is not installed correctly, you may
damage the system board.
8 Gently pull the securing tab (if present) and place the card in the connector. Press down firmly and
ensure that the card is fully seated in the slot.
1
3
2 securing tab
2
3 PCI Express x16 card slot
Removing and Installing Parts
89