Cosel LCA10S-5 Instruction Manual

Rugged PCB type
LCA10S
R
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
SPECIFICATIONS
MODEL
VOLTAGE[V]
CURRENT[A]
FREQUENCY[Hz]
INPUT
EFFICIENCY[%]
INRUSH CURRENT[A] ACIN 100V 25typ ( Io=100% )
LEAKAGE CURRENT[mA] 0.5max ( 60Hz , According to UL , CSA and DEN-AN )
LCA
VOLTAGE[V]
CURRENT[A]
LINE REGULATION[mV]
LOAD REGULATION[mV] 40max
RIPPLE[mVp-p]
OUTPUT RIPPLE NOISE[mVp-p]
TEMPERATURE REGULATION[mV] 50max
DRIFT[mV]
START-UP TIME[ms]
HOLD-UP TIME[ms]
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixed ( "Y"which can be adjusted the output is available as optional:5V -5 to +10% : 12 , 15 , 24V t 10% )
OUTPUT VOLTAGE SETTING[V] 4.9 - 5.3
OVERCURRENT PROTECTION Works over 105% of rating ( works over 105% of peak current at option -H ) and recovers automatically
OVERVOLTAGE PROTECTION Works over 115% of rating , by zener diode clamping
PROTECTION
CIRCUIT AND OPERATING INDICATION Not provided
OTHERS
REMOTE SENSING
REMOTE ON/OFF
INPUT-OUTPUT
ISOLATION INPUT-FG
OUTPUT-FG
OPERATING TEMP. , HUMID.AND ALTITUDE -10 to +60 C , 20 - 90%RH ( Non condensing ) ( Refer to DERATING CURVE ), 3 , 000m ( 10 , 000feet ) max
STORAGE TEMP. , HUMID.AND ALTITUDE -20 to +75 C , 20 - 90%RH ( Non condensing ), 9 , 000m ( 30 , 000feet ) max
ENVIRONMENT
VIBRATION
IMPACT
SAFETY AND
AGENCY APPROVALS
NOISE
CONDUCTED NOISE
REGULATIONS
CASE SIZE/WEIGHT
OTHERS
COOLING METHOD
*1
Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101).
*2
Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C with the input voltage held constant at the rated input/output.
*
Avoid prolonged use under over-load.
E-60
LCA10S-5 LCA10S-5-H
10 10
5V 2A 5V 2A
LCA10S-5 LCA10S-5-H
AC85 - 132 1 f or DC110 - 170
ACIN 100V 0.3typ ( Io=100% )
47 - 440 or DC
71typ 71typ
5 5
2 ( Peak 3 )
2
20max 20max
40max
0 to +50 C
* 1 80max 80max
-10 - 0 C
* 1 140max 140max
0 to +50 C
120max 120max
* 1
-10 - 0 C
160max 160max
* 1
50max
20max 20max
* 2
100max ( ACIN 85V , Io=100% )
10typ ( ACIN 85V , Io=100% ) 20typ ( ACIN 100V , Io=100% )
4.9 - 5.3
Not provided
Not provided
AC2 , 000V 1minute , Cutoff current = 10mA , DC500V 50M W min ( At Room Temperature )
AC2 , 000V 1minute , Cutoff current = 10mA , DC500V 50M W min ( At Room Temperature )
AC500V 1minute , Cutoff current = 100mA , DC500V 50M W min ( At Room Temperature )
10 - 55Hz , 19.6m/s 2 ( 2G ), 3minutes period , 60minutes each along X , Y and Z axis
2 ( 20G ), 11ms , once each X , Y and Z axis
196.1m/s
UL60950-1 , CSA C22.2 No.60950-1 Complies with DEN-AN
Complies with FCC-B , VCCI-B
49 X 17 X 94mm ( W X H X D ) / 65g max
Convection
Ordering information
LC A 10
1 2 3
Recommended Noise Filter
NAC-06-472
High voltage pulse noise type : NAP series
Low leakage current type : NAM series
*The Noise Filter is recommended
*to connect with several devices.
LCA10S-12 LCA10S-15
10.8 10.5
12V 0.9A 15V 0.7A
LCA10S-12 LCA10S-15
75typ 75typ
12 15
0.9 0.7
48max 60max
100max 120max
120max 120max
160max 160max
150max 150max
180max 180max
120max 150max
48max 60max
11.5 - 12.5 14.4 - 15.6
S -5 -O
4 5 6
1Series name
2100/120V input
3Output wattage
4Single output
5Output voltage
6Optional
C :with Coating
G :Low leakage current
Y :with Potentiometer
LCA10S-24
12
24V 0.5A
LCA10S-24
78typ
24
0.5
96max
150max
120max
160max
150max
180max
240max
96max
23.0 - 25.0