D-Link DSL-300 Quick Install Manual page 3

1 1
Connecting the DSL-300 Connecting the DSL-300
continued continued
Now connect the phoneline cable from the DSL-300 to your phone jack.
If the ADSL Link LED does not glow green within one minute of its being
connected, check all of your cable connections to make sure that they are
correct and securely installed.
When you have completed all the connections, your DSL-300 will look
like this:
Power Cord
Phone line cable
(Plug the other end of the
(Plug the other end of the
power cord into the power
phone line cable into the
outlet.)
phone jack.)
Ethernet Cable
(Plug the other end of the
Ethernet cable into the
Ethernet port on the NIC,
which is installed in your
computer.)