D-Link DSL-300 Quick Install Manual page 7

3 3
Using the Configuration Utility Using the Configuration Utility
continued
Type "Admin" for the default
password.
Click OK
Click on the "General ADSL Information" tab and input the proper VPI
settings provided by your DSL provider.
The DSL-300 comes with a default VPI of "0" and a VCI of "35."
To change these settings, simply highlight the number you wish to change,
and type in a new value in the box.
NOTE: VPI: "0" and VCI: "35" settings are most common among DSL
providers. This will not work for others who have different VPI and VCI
settings. Please contact your service provider for the correct VPI and
Click OK after you
have input the correct
ADSL settings as
described above.
VCI settings.