Table of Contents
Advertisement
Section - Configuration
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.
There are two accounts that can access the management interface through the web browser. The accounts are admin
and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot
make any changes. Only the admin account has the ability to change both admin and user account passwords.
Admin Password:
Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
User Password:
Enter the new password for the User login. If you login as
the User, you can only see the settings, but cannot change
them.
Gateway Name:
Enter a name for the DIR-628 router.
Remote
Remote management allows the DIR-628 to be configured
Management:
from the Internet by a web browser. A username and
password is still required to access the Web-Management
interface. In general, only a member of your network can
browse the built-in web pages to perform Administrator tasks.
This feature enables you to perform Administrator tasks from
the remote (Internet) host.
Remote Admin
The port number used to access the DIR-628.
Port:
Example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP
address of the DIR-628 and 8080 is the port used for the
Web Management interface.
Inbound Filter:
This section will list any rules that are created. You may click
the Edit icon to change the settings or enable/disable the
rule, or click the Delete icon to remove the rule.
D-Link DIR-68 User Manual
Administrator Settings
Hide quick links:
Advertisement
Table of Contents
