Wireless Settings - D-Link RangeBooster N DIR-628 User Manual

Section  - Configuration
Enable Wireless:
Check the box to enable the wireless function. If you do not want to
use wireless, uncheck the box to disable all the wireless functions.
Click Add.New to create your own time schedule to enable the
wireless function.
Wireless Network
Service Set Identifier (SSID) is the name of your wireless network.
Name:
Create a name using up to 32 characters. The SSID is case-
sensitive.
802.11 Band:
Select 2.4GHz if you want to use the 2.4GHz band or 5GHz band
if you want to use the 5GHz band.
802.11 Mode:
2.4GHz:
Select one of the following:
802.11g. Only - Select if all of your wireless clients are
802.11g.
Mixed. 802.11g. and. 802.11b - Select if you are using both
802.11b and 802.11g wireless clients.
802.11b. Only - Select if all of your wireless clients are
802.11b.
802.11n.Only - Select only if all of your wireless clients are
802.11n.
Mixed.802.11n,.802.11b,.and.802.11g - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.
Mixed.802.11n.and.802.11g - Select if you are using a mix of 802.11n and 802.11g wireless clients.
5GHz:
Select one of the following:
802.11a.Only - Select if all of your wireless clients are 802.11a.
802.11n.Only - Select only if all of your wireless clients are 802.11n.
802.11n.and.802.11a - Select if you are using both 802.11b and 802.11g wireless clients.
D-Link DIR-68 User Manual

Wireless Settings