Section - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the Broadband Router.
Configure MAC
Select Turn.MAC.Filtering.Off, allow.MAC.
Filtering:
addresses. listed. below, or deny. MAC.
addresses.listed.below from the drop-down
menu.
MAC Address:
Enter the MAC address you would like to
filter.
To find the MAC address on a computer,
please refer to the Networking. Basics
section in this manual.
DHCP Client:
Select a DHCP client from the drop-down
menu and click << to copy that MAC
Address.
D-Link DIR-68 User Manual
Network Filters