D-Link DI-824VUP User Manual page 47

Using the Configuration Menu
Advanced > SNMP
SNMP (Simple Network Management Protocol) is a widely used network monitoring and
control protocol that reports activity on each network device to the administrator of the
network. SNMP can be used to monitor traffic and statistics of the DI-824VUP. The DI-
824VUP supports SNMP v1 or v2c.
Enable SNMP
Local
Remote
Get Community
Set Community
SNMP v1
SNMP v2
(Simple Network Management Protocol.)
LAN (Local Area Network).
WAN (Wide Area Network).
Enter the password public in this field to allow "Read only" ac-
cess to network administration using SNMP. You can view the
network, but no configuration is possible wth this setting.
Enter the password private in this field to gain "Read and Write"
access to the network using SNMP software. The administra-
tor can configure the network with this setting.
Simple Network Management Protocol (SNMP) is an applica-
tion layer protocol that facilitates the exchange of management
information between nework devices.
Enhanced version of SNMP v1 with additional protocol opera-
tions such as UDP, IP, CLNS, DDP, and IPX.
47