D-Link DI-824VUP User Manual page 147

Frequently Asked Questions (continued)
How do I configure my DI-824VUP to play Warcraft 3?
To hose a Warcraft 3 game, you must open ports on your router to allow incoming
traffic. To play a game, you do not have to configure your router.
Warcraft 3 (Battlenet) uses port 6112.
For the DI-824VUP:
Step 1
Open your web browser and
enter the IP Address of your router
(192.168.0.1). Enter username (admin)
and your password (leave blank).
Step 2
Click on Advanced and then
click Virtual Server.
Step 3
Create a new entry: Click
Enabled. Enter a name (warcraft3).
Private IP - Enter the IP Address of the
computer you want to host the game.
Select Both for Protocol Type Enter
6112 for both Private Port and Public
Port Click Always or set a schedule.
Step 4
Click Apply and then Continue.
Note: If you want multiple computers from you LAN to play in the same game that
you are hosting, then repeat the steps above and enter the IP Addresses of the other
computers. You will need to change ports. Computer #2 can use port 6113, computer
#3 can use 6114, and so on.
You will need to change the port information within the Warcraft 3 software for
computers #2 and up.
Configure the Game Port information on each computer:
Start Warcraft 3 on each computer, click Options > Gameplay. Scroll down and you
should see Game Port. Enter the port number as you entered in the above steps.
warcraft3
100
Both
6 5 0 0
6 5 0 0
147