D-Link DI-824VUP User Manual page 150

Frequently Asked Questions (continued)
How do I set up my DI-824VUP to use iChat? -for Macintosh users-
(continued)
For File Sharing:
Step 1
Click on Advanced and
then Virtual Server.
Step 2
Check Enabled to
activate entry.
Step 3
Enter a name for your
virtual server entry (ichat3).
Step 4
Next to Private IP, enter
the IP Address of the computer on
your local network that you want
to allow the incoming service to.
Step 5
Select TCP for Protocol
Type.
Step 6
Enter 5190 next to Private
Port and Public Port.
Stsp 7
Click Always or configure a schedule.
Step 8
Click Apply and then Continue.
If using Mac OS X Firewall, you may need to temporarily turn off the firewall in
the Sharing preference pane on both computers.
To use the Mac OS X Firewall, you must open the same ports as in the router:
Step 1
Choose Apple menu > System Preferences.
Step 2
Choose View > Sharing.
Step 3
Click the Firewall tab.
Step 4
Click New.
Step 5
Choose Other from the Port Name pop-up menu.
Step 6
In the Port Number, Range or Series field, type in: 5060, 16384-16403.
Step 7
In the Description field type in: iChat AV
Step 8
Click OK.
ichat3
100
6 5 0 0
6 5 0 0
150