Frequently Asked Questions (continued)
Why can´t I access the Web-based configuration? (continued)
Step 4 (continued)
in the same range of the device you are attempting to configure. Most D-Link devices
use the 192.168.0.X range.
How can I find my IP Address in Windows 2000/XP?
Step 1
Click on Start and select Run.
Step 2
Type cmd then click OK.
Step 3
From the Command Prompt, enter ipconfig. It will return your IP
Address, subnet mask, and default gateway
Step 4
Type exit to close the command prompt.
Check your IP address. Your computer must have an IP Address
104