System - D-Link DHP-1320 User Manual

Section 3 - Configuration
This section allows you to manage the router's configuration settings, reboot the router, and restore the router to the factory default settings.
Restoring the unit to the factory default settings will erase all settings, including any rules that you've created.
Save Settings to
Use this option to save the current router configuration
Local Hard Drive:
settings to a file on the hard disk of the computer you
are using. First, click the Save button. A file dialog will
appear, allowing you to select a location and file name
for the settings.
Load Settings from
Use this option to load previously saved router configuration
Local Hard Drive:
settings. First, use the Browse option to find a previously
saved file of configuration settings. Then, click the Upload
Settings button below to transfer those settings to the
router.
Restore to Factory
This option will restore all configuration settings back
Default Settings:
to the settings that were in effect at the time the router
was shipped from the factory. Any settings that have
not been saved will be lost, including any rules that
you have created. If you want to save the current router
configuration settings, use the Save button above.
Reboot Device:
Click to reboot the router.
D-Link DHP-1320 User Manual

System

90