Port Forwarding - D-Link DHP-1320 User Manual

Section 3 - Configuration
This will allow you to open a single port or a range of ports.
Enable Checkbox:
Tick the checkbox on the left side to enable the Port
Forwarding rule.
Name:
Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click << to populate the fields.
IP Address:
Enter the IP address of the computer on your local
network that you want to allow the incoming service
to. If your computer is receiving an IP address
automatically from the router (DHCP), you computer
will be listed in the Computer Name drop-down
menu. Select your computer and click <<.
TCP Port/
Enter the port that you want to open next to TCP
UDP Port:
Port and UDP Port.
Schedule:
Use the drop-down menu to schedule the time
that the Port Forwarding rule will be enabled. The
schedule may be set to Always, which will allow
the particular service to always be enabled. You can
create your own times in the Tools > Schedules
section.
Inbound Filter:
Select Allow All (most common) or a created
Inbound filter. You may create your own inbound
filters in the Advanced > Inbound Filter page.
Click the Save Settings button to save any changes made.
D-Link DHP-1320 User Manual

Port Forwarding

50