D-Link DHP-1320 User Manual page 74

Section 3 - Configuration
To configure the Router to use a Static IPv6 Stateful connection, configure the parameters in the LAN Address Autoconfiguration
Settings section as described below:
Enable
Check to enable the Autoconfiguration feature.
Autoconfiguration:
Autoconfiguration
Select the Stateful(DHCPv6) option from the drop-down
Type:
menu.
IPv6 Address Range
Enter the start IPv6 Address for the DHCPv6 range for your
Start:
local computers.
IPv6 Address Range
Enter the end IPv6 Address for the DHCPv6 range for your
End:
local computers.
IPv6 Address
Enter the IPv6 Address Lifetime (in minutes).
Lifetime:
Click the Save Settings button to save any changes made.
D-Link DHP-1320 User Manual
IPv6
Static IPv6 - Stateful
69