Advanced Wireless Settings - D-Link DHP-1320 User Manual

Section 3 - Configuration
Transmit Power:
Set the transmit power of the antennas.
Beacon Period:
Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value. 100 is
the default setting and is recommended.
RTS Threshold:
This value should remain at its default setting of 2346.
If inconsistent data flow is a problem, only a minor
modification should be made.
DTIM Interval:
(Delivery Traffic Indication Message) 1 is the default
setting. A DTIM is a countdown informing clients of the
next window for listening to broadcast and multicast
messages.
WLAN Partition: This enables 802.11d operation. 802.11d is a wireless specification developed to allow implementation of wireless networks in
countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.
WMM Enable: WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients.
Short Guard
Check this box to reduce the guard interval time therefore increasing the data capacity. However, it's less reliable and may create
Interval:
higher data loss.
Click the Save Settings button to save any changes made.
D-Link DHP-1320 User Manual

Advanced Wireless Settings

802.11n/b/g (2.4GHz)
62