D-Link DHP-1320 User Manual page 35

Section 3 - Configuration
Select Dynamic IP (DHCP) from the drop-down menu to obtain IP Address information automatically from your ISP. Select
this option if your ISP does not give you any IP numbers to use. This option is commonly used for cable modem services such
as Comcast and Cox.
Host Name:
The Host Name is optional but may be required by some
ISPs. Leave blank if you are not sure.
Primary/
Enter the Primary and Secondary DNS server IP addresses
Secondary DNS
assigned by your ISP. These addresses are usually obtained
Server:
automatically from your ISP. Enter the value 0.0.0.0 if you
did not specifically receive these from your ISP.
MTU: Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your specific ISP. 1500
is the default MTU.
MAC Address: The default MAC Address is set to the Internet port's physical
interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address
unless required by your ISP. You can use the Clone Your
PC's MAC Address button to replace the Internet port's
MAC address with the MAC address of your Ethernet card.
Click the Save Settings button to save any changes made.
D-Link DHP-1320 User Manual
Manual Internet Connection Setup
Dynamic IP (DHCP)
30