D-Link DHP-1320 User Manual page 131

Section 3 - Configuration
This page will allow you to change the Administrator password. The administrator password has read/write access.
Time Zone:
Select the Time Zone from the drop-down menu.
Daylight
To select Daylight Saving time manually, select
Saving:
enabled or disabled, and enter a start date and an
end date for daylight saving time.
Enable NTP
NTP is short for Network Time Protocol. NTP
Server:
synchronizes computer clock times in a network
of computers. Check this box to use a NTP server.
This will only connect to a server on the Internet,
not a local server.
NTP Server
Enter the NTP server or select one from the drop
Used:
down menu.
Manual:
To manually input the time, enter the values in
these fields for the Year, Month, Day, Hour, Minute,
and Second and then click Set Time. You can also
click Copy Your Computer's Time Settings.
D-Link DHP-1320 User Manual
Time
126