Jwac Port Settings - D-Link xStack DGS-3426P User Manual

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Update Server IP
Mask
Index
IP Address
Mask
Delete
Click Apply to implement changes made.

JWAC Port Settings

To view JWAC port settings for the Switch, go to the Security folder, open JWAC, and click JWAC Port Settings, which will
open the following window:
To configure JWAC port settings for the Switch, go to the Security folder, open JWAC, click JWAC Port Settings, and click
the Add button, which will open the following window:
configured URL. When a computer is connected to the specified URL, the quarantine server
will request the computer user to input the user name and password to complete the
authentication process.
Update Server Configuration
This parameter specifies the Update Server IP address.
This parameter specifies the Server IP net mask.
Update Server Table
This parameter displays the Index of the Server.
This parameter displays the Server IP Address.
This parameter displays the Server IP net mask.
This button allows you to delete an existing Server entry.
Figure 9- 35. JWAC Port Settings window
213