Mounting The Switch In A Standard 19" Rack; Power On; Power Failure - D-Link xStack DGS-3426P User Manual
Layer 2 gigabit ethernet managed switch
Hide thumbs
Also See for xStack DGS-3426P:
- Reference manual (629 pages) ,
- Cli reference manual (540 pages) ,
- Product manual (424 pages)
Table of Contents
Advertisement
xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Mounting the Switch in a Standard 19" Rack
Power On
1. Plug one end of the AC power cord into the power connector of the Switch and the other end into the local power source
outlet.
2. After powering on the Switch, the LED indicators will momentarily blink. This blinking of the LED indicators represents
a reset of the system.
Power Failure
As a precaution, in the event of a power failure, unplug the Switch. When power is resumed, plug the Switch back in.
Figure 2- 18. Installing Switch in a rack
11
Advertisement
Table of Contents
