D-Link DCS-6620 User Manual page 64

Ptz internet camera
Hide thumbs Also See for DCS-6620:
Table of Contents

Advertisement

DCS-6620 User's Manual
Next, click the Network button under the Advanced tab to set the FTP server settings for the
DCS-6620.
In this window, enter the settings for the FTP server you wish to record to. Optionally, you can
enter settings for a secondary backup FTP server.
1
Local FTP server port:
2
D-Link Systems, Inc.
Record Snapshots to your FTP server with Motion Detection
Click Network
The Default port is 21. To connect to an FTP server, it is
recommended that you do not change the port number unless
your camera is behind a router. If your camera is behind a
router, you can assign any port number to this field, but you
must enable port forwarding on the router. Please refer to your
router manual for more information on port forwarding.
1st FTP server:
If you are going to upload snapshots to an FTP server, you will
need to fill in the Domain name or IP address of your external
FTP server such as ftp://dlink.com or ftp://123.123.123.1. (The
server name and IP address will vary depending on the user.)
The following user settings must be correctly configured for
remote access.
1
123.123.123.1
John Smith
4
Snapshot
6
2
3
5
64

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents