D-Link DCS-6620 User Manual page 95

Ptz internet camera
Hide thumbs Also See for DCS-6620:
Table of Contents

Advertisement

DCS-6620 User's Manual
Monitor Program (continued)
IP surveillance includes pan/tilt control, DI/DO (Digital Input / Digital Output) control, and an
alert message receiver. Each of these are described in detail below.
P/T Control
Refer to the following figure to use the pan and tilt controls.
Tilt/navigate camera using arrows.
Pan –
Pans the camera one full cycle.
Stop –
Stops movement of the camera during pan.
Patrol –
Enables the Auto Patrol feature.
Pull down menu –
DI/DO Control
Clicking on the "DI/DO" button shown below, you can switch to the DI/DO controls. The color
of the channel number indicates the status of the camera's DI (Digital Input).You can click the
"Switch button" to change the HI/LOW state of the DO (Digital Output). With these features,
you can monitor the remote sensor input from DI and also trigger the camera by DO switch
Set digital output to LOW
Set digital output to HIGH
When the color of a DI/DO number is gray, that means the video has not yet been connected
to a camera.
D-Link Systems, Inc.
Return to home position.
Select a preset position to move the camera to.
Using IP surveillance Software
No connection
.
95

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents