D-Link DCS-6620 User Manual page 106

DCS-6620 User's Manual
Scheduling (continued)
Digital Input
In the figure above, there are four conditions for the digital input. Check the condition that you
would like to record while the condition triggers.




Schedule in Continuous mode
If you select Continuous mode in the schedule mode selector, it will record continuously during
the schedule that is set up by the user.
Secondary Schedule
Secondary schedule is for recording outside of the primary schedule.The secondary schedule
provides options to record without a specified date or time.
Schedule modes
D-Link Systems, Inc.
high
Checking this will trigger recording while the digital input is high/ The technical
name for this event is line trigger.
low
Checking this will trigger recording while the digital input is low. The technical
name for this event is line trigger.
rising
Checking this will trigger recording while the digital input is changing from low
to high. The technical name for this event is edge trigger.
falling
Checking this will trigger recording while the digital input is changing from high
to low. The technical name for this event is edge trigger.
Using IP surveillance Software
106