The Layout - D-Link SECURICAM Network DCS-2100G User Manual

DCS-2100G User's Manual

The Layout

There are six different layouts available, as shown below, for the display windows in
the monitor program. You can select between 1 camera, 4 camera, 6, camera, 9 camera,
13 camera, and 16 camera layout. You can select one of them by clicking on a layout
icon. In each layout, you can drag and drop the "channel number" to any display window
in the video area. Following the procedures described in the section titled "Show the
video of a specified channel", you can add the video channels to display windows
within the selected layout in the video area one by one. You can also exchange the
video between different display windows by dragging and dropping. Double clicking
on a display window will switch to single channel layout.
When you choose the one-channel layout or four-channel layout, the "Page up" and
"Page down" buttons will be shown in the left-bottom corner of the video area. You can
use these two buttons to switch the pages, as shown in the figure below.
PT
D-Link Systems, Inc.
Using IP Surveillance Software
98