About; Miscellaneous Functions - D-Link SECURICAM Network DCS-2100G User Manual

DCS-2100G User's Manual
If you have checked the box "Enable Motion Detect" or "Enable Digital Input" on the
Camera Configurations > Alert Settings screen, the alert message will show in the
window shown above. Once the alert, caused by motion detection or a digital input
level change is triggered, the alert message will be shown in this window. If there are
more events than this window can display, a scroll bar will appear.
The message format is described as follows:
"time"=>"alert type" #"channel number"("win1","win2","win3")
For example, the message "PM 02:41:00=>MO #1(0,1,1)" means that this is a motion
detection alert occurring at 02:41:00 PM in Motion Window 2 and Motion Window 3, for
camera #1. If the message "PM 02:41:56=>DI #1" is listed, that means there is an alert
triggered by the DI, for camera #1, at 02:41:56 PM .

About

By choosing "About", located in the configuration menu shown below, a dialog box will
appear and display the information about the installed version of IP surveillance. The
information includes the software name, version, user name, and company.

Miscellaneous Functions

This section will describe some other miscellaneous functions of the icons shown below.
The icons, from left to right, are Quit, Minimize, Full Screen, Stop Alert Sound, and
Configuration Menu.
D-Link Systems, Inc.
Using IP Surveillance Software
101