D-Link SECURICAM Network DCS-2100G User Manual page 51

Wireless internet camera
Hide thumbs Also See for SECURICAM Network DCS-2100G:
Table of Contents

Advertisement

DCS-2100G User's Manual
SMTP (mail)
server 2:
SMTP account
SMTP password 2:
Recipient email
address 2:
Return email
address:
Local FTP server
1st FTP server:
1st FTP user
1st FTP password:
1st FTP remote
Primary FTP
Passive Mode:
D-Link Systems, Inc.
The domain name or IP address of a secondary mail server
used only if the primary mail server is unreachable.
The user name for the second SMTP server.
name 2:
The password used to log into the second e-mail account. (The
password will appear as dots instead of entered characters.)
The e-mail address of recipients for the secondary server.
The return e-mail address to use if the snapshot or system log
e-mail fails to send. (This address should be within the SMTP
server's domain for authentication purposes.)
It can be other than default port 21. If you find that you want to
port:
change the port to a port number other than 21, you will need
to specify the port when connecting to the FTP server. For
example FTP://68.5.1.81:60 (if you are to use port 60 for your
FTP server port)
The domain name or IP address of the external FTP server.
The following user settings must be correctly configured for
remote access.
name:
Granted user name on the external FTP server.
Granted password on the external FTP server.
Granted folder on the external FTP server. The string must
folder:
conform to the external FTP server. Some FTP servers cannot
accept a preceding slash symbol before the path if there is no
virtual path mapping. Refer to the instructions of the external
FTP server for details. The folder privilege must be open for
upload.
If the DCS-2100G is located inside a network that is protected
by a firewall, a data connection for FTP may be prohibited.
Passive mode FTP can bypass this rule and allow the
uploading of snapshots. If the passive mode is selected, the
DCS-2100G can automatically attempt to upload in active
mode if the external FTP server does not support passive mode.
Using the DCS-2100G with an Internet Browser
51

Advertisement

Table of Contents
loading

Table of Contents