Table of Contents
Advertisement
DCS-2100G User's Manual
Directory Settings
Snapshot
directory:
Recording
directory:
Scheduler
directory:
Record Diskspace Usage Settings
Cycle Recording:
Reserved space:
Alert Sound:
Modulation Mode:
Note: You need to select the input signal format according to the camera type or CCD
module type that is connected to the DCS-2100G.
D-Link Systems, Inc.
The directory for storing snapshots in *.bmp format from video
channels of the monitor tool and playback programs, which is
shown on page 91.
The directory for storing the recorded video data from video
channels.
The directory for storing the default and user-customized
schedules for the scheduled recording of each channel.
When you turn this setting on, the video database system of
this application software will overwrite the oldest data if the
specified path has become full. That means it will record video
data in a loop. If this setting is unchecked, a warning message
will pop up when it is approaching the storage space limit. All
recording will stop when the limit of the hard disk usage is
reached.
Indicate the size of the hard disk that will be reserved for other
Windows applications (at least 15%). The remainder of the hard
disk space will be available for recording. The more space you
have reserved, the less there will be available for your camera(s)
to record to. As you move the bar to the right, more space will
be available for your camera(s) and conversely, less space will
be available for your other applications. If the recording data
exceeds this limitation, the new video data will replace the
oldest data (on a First In First Out (FIFO) basis) when "Cycle
Recording" has been checked.
You can load a custom *.wav file for the sound of alert triggering.
You can also select from the sound files in Windows.
You must select the input signal format (NTSC or PAL) for
displaying the original resolution of video stream from
DCS-2100G.
Using IP Surveillance Software
92
Advertisement
Table of Contents
