Advertisement
Quick Links
Care and Cleaning:
Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with
contamination free warm soapy water and a damp soft cloth.
Methven warrants this product against manufacturing defects and that it is suitable for use
under the general operating conditions specified in this instruction sheet. However, regional
regulations apply and may affect your warranty. Please refer to www.methven.com or call
customer service for full details.
New Zealand
0800 804 222
439861
Australia
1300 638 483
Wall Mounted Spout Square
Installation Guide
Technical Specifications:
Operating Pressure:
Min: 150kPa/1.5bar
Max: 500kPa/5bar*
Optimum: 150kPa/1.5bar - 500kPa/5bar
Operating Temperature:
Hot: Max 80°C*
Cold: Min 5°C
Inlet Connections:
All ½" BSP
* Regional specific regulations apply.
Please refer to your warranty statement
at www.methven.com
UK
0800 195 1602
ISSUE A
Model No (AU):
03-9777M
03-9760M
Model No (NZ):
ELSPWBT
NESPWBT
BLSPWBT
www.methven.com
Advertisement
Related Manuals for METHVEN 03-9777M
Summary of Contents for METHVEN 03-9777M
- Page 1 Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with contamination free warm soapy water and a damp soft cloth. Methven warrants this product against manufacturing defects and that it is suitable for use under the general operating conditions specified in this instruction sheet. However, regional regulations apply and may affect your warranty.
- Page 2 IMPORTANT: Before you begin, turn off the water supply. General: Installation: 15±2mm • Methven recommends this product is installed by a licensed plumber in compliance with Step 1 all relevant regional regulations. Cut outlet nipple to 15±2mm from finished wall surface. •...
Need help?
Do you have a question about the 03-9777M and is the answer not in the manual?
Questions and answers