Introduction - Bausch Datacom DinBox GSM M4 Configuration Manual

1.

Introduction

This manual is the reference when setting up the DinBox GSM M4 modem for your
application. Because of the nature of this product and its field of application, some
degree of technical background knowledge regarding the application and data-
communication is assumed.
The DinBox GSM M4 modem is a versatile communication device designed to provide a
flexible data communication solution for an industrial environment. The DinBox GSM M4
modem contains a number of options to accommodate different communication speeds,
power supplies and interfaces.
This modem has an extended TCP/IP stack implementation, and is able to connect non-
IP devices to an IP network over an Ethernet or WAN link.
The main specifications of the DinBox GSM M4 are:
 DIN rail mountable housing
 Configuration, setup and monitoring via GUI / HTML pages
 1 x status RGB LED
 10/100 Mb Ethernet interface
 2-wire (+GND) RS-232 serial interface
 galvanic isolated 2-wire RS-485 serial interface
 Sierra Wireless HLx WAN module
 SIM card holder internally
 SMA antenna connector
 ST STM32F4 Cortex-M4 processor
 64KB FRAM [8.192*8bit]
 2Mbit EEPROM [(262.144*8bit]