Summary of Contents for Eaton TRIPP LITE B127A-1A1-BDBD
Page 1
Este manual está disponible en español en la página de Eaton: Tripplite.Eaton.com/support Ce manuel est disponible en français sur le site Web de Eaton : Tripplite.Eaton.com/support Dieses Handbuch ist in deutscher Sprache auf der Eaton-Website verfügbar: Tripplite.Eaton.com/support...
Package Contents • Transmitter • Receiver • External Power Supply (Input: 100-240V, 50/60 Hz, 0.6A; Output: 24V 1A) • (4x) International Plugs* • Mounting Hardware • Owner's Manual *Includes NEMA 1-15P (North America), CEE 7/16 Schuko (Europe), BS 1363 (U.K.) and AS/NZS 3112 (Australia) plugs Optional Accessories •...
Page 3
Product Features • Compatible with B127A-010-H signal booster (sold separately) to increase transmission distance up to 400 ft. from the source • HDCP 2.2 compatible • Plug-and-play - no software or drivers required • Supports bi-directional IR and USB 1.1 function by DIP switch selection •...
Page 4
Package Contents B127A-110-BD • DisplayPort 1.2a over Cat6 daisy-chainable receiver with repeater and Power over Cable (PoC) • Extends and repeats a 4K x 2K (3840 x 2160) @ 30 Hz signal up to 230 ft. (70 m) from the source in daisy-chain installations •...
Page 5
Package Contents B127A-111-BDTH • DisplayPort 1.2a over Cat6 daisy-chainable extender kit with Power over Cable (PoC) • Extends and repeats a 4K x 2K (3840 x 2160) @ 30 Hz signal up to 230 ft. (70 m) from the source in daisy-chain installations •...
Page 6
Disclaimer Before installation, check the following settings of your source(s) and TV/monitor(s): 1. Set to display 60 Hz. Double-check factory settings, in case the default is set to a lower frequency (Hz) than advertised. 2. Ensure the input setting of your monitor is set at HDMI 2.0 or DisplayPort 1.2a.
Mounting Instructions The B127A-1A1-BDBH, B127A-1A1-BDBD, B127A-110-BD and B127A-111-BDTD include mounting hardware that allows for a variety of mounting methods. The following images illustrate how the included mounting brackets can be attached for different installations. Note: The model shown in the below images is for illustrative purposes only. Your product may vary by model number, size or port orientation.
Standard Extender Kit Installation Model B127A-1A1-BDBH Notes: 1) Test to ensure the entire installation works properly before pulling cables through ceilings/walls. 2) To achieve maximum distance and performance, use 24 AWG solid wire Cat6 cable. Using stranded-wire Cat6 cable or cable with a gauge (AWG) size higher than 24 AWG will result in shorter extension distance.
Page 9
Standard Extender Kit Installation 1. Make sure all equipment in the installation—such as monitors, the DisplayPort source and the transmitter—is powered OFF. 2. Using a DisplayPort cable, connect the DisplayPort source to the INPUT port on the local transmitter unit. 3.
Page 10
Standard Extender Kit Installation Model B127A-1A1-BDBD Notes: 1) Test to ensure the entire installation works properly before pulling cables through ceilings/walls. 2) To achieve maximum distance and performance, use 24 AWG solid wire Cat6 cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher than 24 AWG, will result in shorter extension distance.
Page 11
Standard Extender Kit Installation 1. Make sure all equipment in the installation—such as monitors, the DisplayPort source and the transmitter—is powered OFF. 2. Using a DisplayPort cable, connect the DisplayPort source to the INPUT port on the local transmitter unit. 3.
Page 12
Standard Extender Kit Installation Model B127A-111-BDTD Notes: 1) Test to ensure the entire installation works properly before pulling cables through ceilings/walls. 2) To achieve maximum distance and performance, use 24 AWG solid wire Cat6 cable. Using stranded-wire Cat6 cable or cable with a gauge (AWG) size higher than 24 AWG will result in shorter extension distance.
Page 13
Standard Extender Kit Installation 1. Make sure all equipment in the installation—such as monitors, the DisplayPort source and the transmitter—is powered OFF. 2. Using a DisplayPort cable, connect the DisplayPort source to the INPUT port on the local transmitter unit. 3.
Page 14
Standard Extender Kit Installation 10. The (orange) RJ45 LED will illuminate on both the local transmitter and remote receiver units to indicate a signal is being received from the source to display. The screen should now display on the connected monitor. Receiver with Repeater Daisy-Chain Installation Model B127A-111-BTBD and B127A-110-BD Notes:...
Page 15
Receiver with Repeater Daisy-Chain Installation B127A-110-BD B127A-110-BD Up to 230 ft. (70 m) Cat6 solid cable at 4K/60 Hz Up to 230 ft. (70 m) Cat6 cable at 4K/60Hz Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz ...
Page 16
Receiver with Repeater Daisy-Chain Installation 1. Make sure all equipment in the installation – such as TVs, Blu-ray players and the transmitter – is powered OFF. 2. Connect the DisplayPort source to the INPUT port on the B127A-111-BDTD local transmitter unit using a DisplayPort cable (such as P580-Series cables).
Page 17
16. The maximum number of daisy-chain layers is four for a total distance of 920 ft., but the distance can be extended to 1,090 ft. when a B127A-010-H signal booster is used. See the B127A-010-H product features on Tripplite.Eaton.com for details.
Page 18
USB/IR Controls (B127A-1A1-BDBD and B127A-1A1-BDBH only) The B127A-1A1-BDBD and B127A-1A1-BDBH extender kits provide the following functional controls: • USB 1.1 – One USB Micro-B input at transmitter, dual USB-A outputs at receiver • Bi-Directional IR – Dual 3.5 mm jacks at both the transmitter and receiver (Optional) Connect the included IR-OUT cable to the transmitter unit’s IR-OUT port.
(1) year from the date of initial purchase. Our obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. Visit Tripplite.Eaton.com/ support/product-returns before sending any equipment back for repair. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in any way.
Need help?
Do you have a question about the TRIPP LITE B127A-1A1-BDBD and is the answer not in the manual?
Questions and answers