7-2.2. System Config; 7-2.2.1. Factory Default - Clover CDR-1650 Instruction Manual

Instruction Manual
Stand-alone DVR
7-2.2.
SYSTEM CONFIG
▫ Click the "SYSTEM CONFIG" button in the SYSTEM menu, and the SYSTEM CONFIG
menu will be displayed (See Fig.7-10).
▫ Click the

7-2.2.1. FACTORY DEFAULT

▫ Click the "FACTORY DEFAULT" button in the SYSTEM CONFIG menu, and you will be
asked as shown in Fig.7-12.
▫ Click the "OK" button in Fig.7-12 to reset to the Factory Default Values, and then the
system will save the factory default values (settings).
Click the CANCEL button to cancel.
"EXIT" button to return to the SYSTEM menu.
[Fig.7-10 SYSTEM CONFIG]
[Fig.7-11 Factory Default button]
80