Power On/Off; 6-4.1. Power On; 6-4.2. Power Off - Clover CDR-1650 Instruction Manual

Instruction Manual
Stand-alone DVR

6-4. Power On/Off

6-4.1. POWER ON

On the front panel or the remote controller:
Press the POWER button on the front panel for approx. 3 seconds until the LED lights are
turned on or just press the POWER button on the remote controller.

6-4.2. POWER OFF

On the front panel or the remote controller:
Press the POWER button on the front panel for approx. 3 seconds until the LED lights are
turned off or just press the POWER button on the remote controller and then the following
message will be displayed on the screen.
▫ Press the ENTER (
By clicking the mouse:
▫ Click the POWER OFF button on the MENU bar (See Fig.6-3) and then the message (See
Fig.6-2) will be displayed on the screen.
▫ Click the OK button to turn the power off.
[Fig.6-2Message of POWER off]
↵)
button to turn the power off.
[Fig.6-3 POWER button on MENU bar]
36