Clover CDR-1650 Instruction Manual page 109

7. Setup
By Window Set
Click the WINDOW SET button in the MOTION menu on each of the cameras and click
one of cells (330 cells in total) for the starting point of the area which you would like to
designate, and then click the other one of cells for the ending point of area until the motion
detection area is the size you want it to be. The multiple motion areas can be set on each
of cameras.
The motion detection by Window Set will be made on the designated area only.
Right-click on the current window to return to the MOTION menu.
[Fig.7-78 WINDOW SET button]
CURSOR
[Fig.7-79 Window Set screen]
109