Clover CDR-1650 Instruction Manual page 112

Instruction Manual
Stand-alone DVR
▫ Map View
Click the MAP VIEW button in the MOTION menu to view the current settings for Motion
detection area.
Right-click on the current window to return to the MOTION menu.
CURSOR
Please pay attention to the following directions in order to use the Motion
Note :
Detection function properly:
•
Adjust the sensitivity level and motion area to fit your requirements.
•
Do not use this function in an area where many objects are continuously moving. In
case of this, change the recording mode to the Continuous (Manual) Recording
mode.
•
Use a high quality camera that does not generate video static or "noise". The motion
detection algorithm recognizes this "noise" as a motion and records the noise even if
there was no actual motion.
• Do not point the camera toward a strong and changing lighting source; it can activate
false motion detection.
[Fig.7-84 MAP VIEW button]
[Fig.7-85 Map View screen]
112